If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
First, I took care of the real big events using the Manual Interpolator key (I-key) which uses a combination of time and frequency domain techniques to fill in the gaps. On some of the real bad events (very long - lived) I used the DSE (Direct Spectral Editor). After the real large events were removed (well, except for the skips which still did benefit from the interpolator), I ran the EZ Impulse filter with 50-50-50 settings of the controls. Next, I used a light application of the Expert Impulse filter using 78 mode and finally, I brushed off the remaining small stuff with the narrow crackle filter (using pretty light settings).
Comment