Announcement

Collapse
No announcement yet.

DCart10.7 is now Introduced; Check out its large feature set and new very low price

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Buterema
    replied
    Originally posted by Craig Maier View Post
    Not sure, but that symptom is often reflective of the drivers being set incorrectly. Goto Edit/Preferences/Soundcard and make sure that WDM drivers are checked, especially on Win10 operating systems. MME drivers do not seem to get along with Win10.
    That solved it. Thank you.

    Leave a comment:


  • Craig Maier
    replied
    Not sure, but that symptom is often reflective of the drivers being set incorrectly. Goto Edit/Preferences/Soundcard and make sure that WDM drivers are checked, especially on Win10 operating systems. MME drivers do not seem to get along with Win10.

    Leave a comment:


  • Buterema
    replied
    Just re-installed 10.7 on new computer. Only issue seems to be Playback, which stops after ~ 4.7 seconds. Did I screw something up on playback settings?

    Leave a comment:


  • Craig Maier
    replied
    Good. That inaccurate report I believe is a bug in the previous version.

    Leave a comment:


  • ricky
    replied
    Originally posted by Craig Maier View Post
    Is it 10.06 or 10.6 as the previous version. I am aware of a bug in 10.06 which reports the previous version incorrectly. Print the help/about dcart screen for insurance. Here is what I suggest if you do if have version 10.6. Uninstall it. Then download the demo version of 10.7 and install it. Your serial and registration should be maintained (in the computer registry).
    About window said 10.6 but I did what you suggested and 10.7 installed with no hitch. Thanks

    Leave a comment:


  • Craig Maier
    replied
    Is it 10.06 or 10.6 as the previous version. I am aware of a bug in 10.06 which reports the previous version incorrectly. Print the help/about dcart screen for insurance. Here is what I suggest if you do if have version 10.6. Uninstall it. Then download the demo version of 10.7 and install it. Your serial and registration should be maintained (in the computer registry).

    Leave a comment:


  • ricky
    replied
    Originally posted by ricky View Post
    DCart10.7 will not install over 10.6. Popup says I already have a newer version.
    About in my DCart definitely says I currently have 10.6. I have tried at least 3 different times
    with same result.
    Forgot to mention I am on current version of windows 10.
    Don't think I got a response on my problem above. Why does DCart 10.7 think 10.6 is a newer version
    and won't install?




    Leave a comment:


  • Craig Maier
    replied
    We talked today on the phone - - - you are using a very old and obsolete operating system, so all bets are off. Update your operating system to one that is supported.

    Leave a comment:


  • ricky
    replied
    DCart10.7 will not install over 10.6. Popup says I already have a newer version.
    About in my DCart definitely says I currently have 10.6. I have tried at least 3 different times
    with same result.
    Forgot to mention I am on current windows 10.
    Last edited by ricky; 01-13-2021, 10:03 PM.

    Leave a comment:


  • Craig Maier
    replied
    Today is 12-30-20, so there are only two more days until the special sale ends. Act now to take advantage of the low prices! And, Happy New Year.

    Leave a comment:


  • Craig Maier
    replied
    It sounds like a bad download - it happens. Uninstall what you have. Then, download a fresh installer from our website at this link:

    https://www.diamondcut.com/st3/produ...n-tools-10-62/

    Install it and everything should be fine.

    Thanks,

    Craig

    Leave a comment:


  • EPB
    replied
    Following upgrade to 10.6 I can't bring up presets. Any suggestions how to find or install them?

    Leave a comment:


  • Craig Maier
    replied
    There is a free upgrade from DCArt10.5 to DCArt10.6 which can be found at this link:

    https://www.diamondcut.com/st3/produ...n-tools-10-62/

    Uninstall the earlier version before installing the latest version show above. Your registration shall be preserved via this process.

    Craig
    Last edited by Craig Maier; 06-25-2020, 07:01 PM.

    Leave a comment:


  • Craig Maier
    replied
    In December of 2018, we introduced version DCArt10.5 with additional features for the audio restoration enthusiast. You can find a free trial version here:

    https://www.diamondcut.com/st3/product/dcart10/

    Craig
    Last edited by Craig Maier; 01-19-2019, 11:44 AM.

    Leave a comment:


  • Craig Maier
    replied
    Hi Rick,

    Yes. DC8.03 will upgrade without issue to DCArt10.

    Craig

    Leave a comment:

Working...
X