Clicks & Pops

[saltydog]

I'm very new at this game and need some initial help. I'm using DC 32 ver 4.0 and trying to declick an LP wave file. I've ran the Impulse Noise first at Tracking=0 and Threshold about 2000; then again with Tracking = 1 and Threshold about 400. I then reversed the file and ran the Impulse filter twice using the above settings. Still getting clicks and can't see them on the track even using zoom-in. Sounds like a scratch on the LP record but can't see it. Please help.

[Jason Begley]

Re: Clicks & Pops

Give the following settings a go;

In HQ Mode with Accuracy set, a threshold of 1, Size between 24-30, Tracking start at 60 and adjust it down until the disturbance goes.


Regards,

Jason Begley