DCart11 is now Introduced; Check out its large feature set and new very low price

[Craig Maier]

Version DCArt10.8 is no available. Follow this link for more information and the demo version:

https://www.diamondcut.com/st3/produ...n-tools-10-62/

It's pricing has been reduced for the 2021 holiday special.

Craig

[Craig Maier]

Summer specials running now through Aug 17th, 2021. Check www.diamondcut.com for deep discounts on software and hardware.

Craig

[Buterema]

Not sure, but that symptom is often reflective of the drivers being set incorrectly. Goto Edit/Preferences/Soundcard and make sure that WDM drivers are checked, especially on Win10 operating systems. MME drivers do not seem to get along with Win10.

That solved it. Thank you.

[Craig Maier]

Not sure, but that symptom is often reflective of the drivers being set incorrectly. Goto Edit/Preferences/Soundcard and make sure that WDM drivers are checked, especially on Win10 operating systems. MME drivers do not seem to get along with Win10.

[Buterema]

Just re-installed 10.7 on new computer. Only issue seems to be Playback, which stops after ~ 4.7 seconds. Did I screw something up on playback settings?

[Craig Maier]

Good. That inaccurate report I believe is a bug in the previous version.

[ricky]

Is it 10.06 or 10.6 as the previous version. I am aware of a bug in 10.06 which reports the previous version incorrectly. Print the help/about dcart screen for insurance. Here is what I suggest if you do if have version 10.6. Uninstall it. Then download the demo version of 10.7 and install it. Your serial and registration should be maintained (in the computer registry).

About window said 10.6 but I did what you suggested and 10.7 installed with no hitch. Thanks

[Craig Maier]

Is it 10.06 or 10.6 as the previous version. I am aware of a bug in 10.06 which reports the previous version incorrectly. Print the help/about dcart screen for insurance. Here is what I suggest if you do if have version 10.6. Uninstall it. Then download the demo version of 10.7 and install it. Your serial and registration should be maintained (in the computer registry).

[ricky]

DCart10.7 will not install over 10.6. Popup says I already have a newer version.
About in my DCart definitely says I currently have 10.6. I have tried at least 3 different times
with same result.
Forgot to mention I am on current version of windows 10.

Don't think I got a response on my problem above. Why does DCart 10.7 think 10.6 is a newer version
and won't install?

[Craig Maier]

We talked today on the phone - - - you are using a very old and obsolete operating system, so all bets are off. Update your operating system to one that is supported.

[ricky]

DCart10.7 will not install over 10.6. Popup says I already have a newer version.
About in my DCart definitely says I currently have 10.6. I have tried at least 3 different times
with same result.
Forgot to mention I am on current windows 10.

[Craig Maier]

Today is 12-30-20, so there are only two more days until the special sale ends. Act now to take advantage of the low prices! And, Happy New Year.

[Craig Maier]

It sounds like a bad download - it happens. Uninstall what you have. Then, download a fresh installer from our website at this link:

https://www.diamondcut.com/st3/produ...n-tools-10-62/

Install it and everything should be fine.

Thanks,

Craig

[EPB]

Following upgrade to 10.6 I can't bring up presets. Any suggestions how to find or install them?

[Craig Maier]

There is a free upgrade from DCArt10.5 to DCArt10.6 which can be found at this link:

https://www.diamondcut.com/st3/produ...n-tools-10-62/

Uninstall the earlier version before installing the latest version show above. Your registration shall be preserved via this process.

Craig