Announcement

Collapse
No announcement yet.

Flat Phono Pre-Amp Specifications

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flat Phono Pre-Amp Specifications

    Often, we receive questions regarding the performance specifications of the CTP 1000 magnetic phono preamplifier. I thought that I would publish them here for anyone interested in such a thing:

    ----------------------------------------------------------------

    CTP 1000 - Computer Transfer Preamp


    (Specifications are typical and subject to change without notice)


    Frequency Response: 10 Hz to 150 KHz, +/- 1 dB @ 2 Volts Peak to Peak Output
    Maximum Output Voltage Swing: 5.75 Volts Peak to Peak w/ > 8.35 VDC Power Supply
    Slew Rate: 3.25 Volts / uSec
    Voltage Gain: 28 dB
    Channel Separation: 60 dB @ 1 KHz
    Total Harmonic Distortion + Noise: < 0.008% @ 1 KHz
    Signal to Noise Ratio (Referenced to 2 Vrms Output, A Weighted): 80 dB
    Input Terminating Resistance: 47 KOhms
    Output Impedance: 1 KOhm, Unbalanced
    Power Supply Input Voltage Range: 8.35 Volts to 12 Volts DC
    Power Supply Input Power Requirements: 9 Volt Battery or External 9 Volt DC Source
    Power Supply Input Current: 3.5 mA @ 9 Volts DC Input, Quiescent
    Power Supply Input Current Maximum: 14 mA @ 12 Volts DC
    Power Supply Maximum Input Power: 170 mWatts @ 12 Volts DC

    Price: $99.00 plus S&H

    Note: It can be purchased at our online store located at www.diamondcut.com

    keywords: CTP-1000 Specifications, CTP-1000 Specs, CTP 1000 Specifications, CTP 1000 Specs
    Last edited by Craig Maier; 12-11-2019, 08:58 PM.
    "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

  • #2
    This preamp has been supersceded by the DCP-47K-F preamplifier found on our website at www.diamondcut.com
    Last edited by Craig Maier; 12-11-2019, 09:02 PM.
    "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

    Comment

    Working...
    X