Announcement

Collapse
No announcement yet.

New Flat Phono Preamp

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New Flat Phono Preamp

    We are proud to introduce a new Flat Phono Preamp which is designed to work in conjunction with the DCArt10.5 Software Virtual Phono Preamp:

    .https://www.diamondcut.com/st3/produ...gory/hardware/

    Here is a direct link to the .pdf of the DCP-47K-F Preamplifier Data Sheet:

    http://www.diamondcut.com/Downloads/...ifications.pdf

    Craig
    Last edited by Craig Maier; 02-28-2019, 10:47 AM.
    "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

  • #2
    Question Craig,
    Will this preamp be available as a "B" model? I am slowly upgrading to a balanced system for my restorations and was wondering if a model would be available for our needs?

    Comment


    • #3
      Does a "B" model mean that it would have balanced outputs (or something else)?

      Craig
      "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

      Comment


      • #4
        Yup, I'm looking for a balanced outputs to use with my ESI Julia card.

        Comment


        • #5
          Ok - the outputs of the DCP-47K-F are single-ended. There are no plans to create a balanced output version of this product.

          Thanks,

          Craig
          "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

          Comment


          • #6
            Hi DJ -

            I do recall that we used to have a balanced output phono preamp block (I was the guy who designed it - but it was a long time ago). I believe it was called the CTP-2000. You needed two units, one for each channel - - - they were mono-block flat preamps. Perhaps you can find a pair of them on ebay or maybe put out the call for one on the classified section of this forum. Somebody probably has some of these out there.

            Craig

            keywords: CTP-2000 Balanced Output Flat phono preamp differential output flat preamplifier
            Last edited by Craig Maier; 08-30-2019, 02:38 PM.
            "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

            Comment


            • #7
              Hi again, DJ,

              Here is another lead which may yield a set of the CTP-2000 balanced output preamps. Contact Tracer and ask if they have any new old stock on them. Write an email to Jeff and ask about it. His email is jeffk@tacertek.com

              Craig
              "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

              Comment


              • #8
                Hi again, one more time, DJ

                I was in error when I called out the DCP-2000 to have balanced outputs. That is not the correct model. The mono-block flat preamp with balanced outputs was the CTP-1000B. Two are required for stereo transfers. Sorry about that.

                Craig

                keywords: ctp-1000B, balanced output preamp
                differential output preamp
                "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

                Comment


                • #9
                  DCP-47K-F Specification Qualifications:

                  1. The published specifications for the DCP-47K-F flat phono preamplifier are 'typical' values

                  2. The published specifications for the DCP-47K-F flat phono preamplifier are 'Subject to Change without Notice'.

                  3. The 47 kOhm input termination resistance is a resistance value, not a complex impedance value.

                  Thanks,

                  Craig
                  "Who put orange juice in my orange juice?" - - - William Claude Dukenfield

                  Comment

                  Working...
                  X
                  escort ordu escort kıbrıs izmit escort bodrum escort rize escort konya escort kırklareli escort izmit escort escort halkalı erzurum escort sivas escort samsuun escort tokat escort